Bunded Tank

KAVISHA EQUIPMENT FZE design and manufacture a wide range of steel tanks to suit your exact requirements both dimensionally and legislatively. We manufacture bulk fuel oil storage tanks with capacities up to 50,000ltrs as standard.

Our Bunded fuel tanks are manufactured with bunds that can contain a minimum of 110% of the volume being stored within the primary tank (100% for the contents plus 10% which accommodates overfilling of the primary tank) in-line with the Pollution Prevention Guidelines.

Our primary tanks are connected to the bund in such a way that should the primary container be overfilled the excess liquid is funneled directly into the bund eliminating contamination of the surrounding area. Our bunds have also been designed so as to prevent any entry of rain water and waste that can be a problem in conventional open bunds. Our tanks are fitted with a bund vent that vents the bund to the atmosphere which prevents the bund from damage that would otherwise be caused when filling or discharging liquids from the primary container.

Our bunds are fit with a top suction point which allows a pump to be fitted, enabling controlled and safe removal of any contents in accordance with the “Waste Management Licensing Regulations”.

The tanks are constructed to international standards container designs for ease of transport and transfer.

Main Specification:

  1. Fill point pipe work, valving and connections.
  2. Pump bund with optional lockable doors.
  3. Mechanical overfill protection valve and electronic overfill alarm.
  4. Venting for tank.
  5. Access ladder and platform.
  6. Calibrated dipstick.
  7. Anti syphon valve.
  8. Incoming Fuel/Product
  9. Fire safe flanged ball valve, camlock adaptor and cap.
  10. Non return valve.
  11. Internal pipe work.
  12. High level alarm hazardous rated, battery powered.
  13. Outgoing Fuel/Product
  14. Bunded pump bay complete with water / product drain valves.
  15. Internal access for hoses from pylon kits.
  16. Lockable bund doors.
  17. Access ladder to work platform either mounted on front (The left or right hand side available)
  18. Bund ventilations.
  19. Bund
  20. Standard Specification.
  21. Self bunded with internal tank and external bund.
  22. Sloping floor design.
  23. Corner container lock castings.
  24. Internal ladder for access.
  25. 600mm manholes.
  26. Air breather vents for free venting.
  27. Secondary Containment (internal bund)
  28. Top roof section designed to release water as it sits above the side rails of the tank.
  29. Additional sockets, doubler pad points available to suit applications.
  30. Front earth connection.
  31. Unit sand blasted & Painted
  32. Statutory signage.
Storage Tank

These products are quite in capacity to design, manufacture, supply and commission in the capacity of Kavisha/ VMix. Designs are available in house and skilled team to manufacture these equipment’s.

Products

© 2017 Kavisha. All rights reserved | Design by Deuce Technology Solutions